How to install and mount my Philips Wireless Motion Sensing System

1. Place the first Motion Sensing Plug you pair in a power point within 10 metres of your router.  

2. Place the second, third or following Motion Sensing Plugs you pair in a power point within 3 to 10 metres from another Motion Sensing Plug. 

3. To enable motion sensing, at least two Plugs are required, but three in a triangular formation provide the best coverage. 

4. For optimal motion sensing, install plugs in power points at waist height if available. Power points at other conventional heights will also work effectively. Avoid placing Motion Sensing Plugs directly on the floor, near the ceiling or behind metallic appliances such as refrigerators, washing machines or any other objects that might interrupt the Wi-Fi signal, as this may reduce their performance. 

5. Plugs can be placed in separate rooms, as the system is not blocked by walls. The coverage will be between the plugs and within the rooms in which they're placed. However, extremely thick walls can block the Wi-Fi signal and reduce the sensing performance.  

6. Plugs within one zone must be placed on the same floor. If you want to cover multiple floors, a separate zone should be created for each floor. 

Kindly note that the Door Sensor is meant to be placed on doors. If the Door Sensor is placed on a window, it should be placed inside to avoid rain and outdoor exposure.  

1. Ensure that you are mounting your Door Sensor within 10 metres from one of the Motion Sensing Plugs. If not, please reconfigure your Motion Sensing Plugs using the placement guidelines.  

2. Ensure that the mounting area is clean and dust-free. 

3. Determine the location for the Door Sensor and the magnet. Ensure that:  

• The Door Sensor and Magnet are placed near the top of the door 

• The Door Sensor and Magnet are placed no more than two centimetres apart from each other 

• The Door Sensor and Magnet are placed with their indicator lines aligned. 

4. Peel off the adhesive backing and firmly stick the Door Sensor and Magnet on the door. 

5. Open the activity graph in the Philips Home Safety app to test the Door Sensor. Open and close the door, and check if the door status is reflected. 

To test if the desired area in your home is successfully covered by your Wireless Motion Sensing System, please walk through the following steps: 

1. Open the Philips Home Safety app and make sure that all your devices are online.  

2. Open the graph view in the Philips Home Safety app.  

3. Walk from one Motion Sensing Plug to the other for 30 seconds to a minute and check if the motion shows in the graph.  

4. Repeat step 3 for all the pairs of devices in your zone. If motion is not picked up, please move around your devices within the guideline distance to optimise placement.  

5. If you want to check if a specific area is covered, move around in that area for 30 seconds to a minute. If you wish to cover an area that is not covered, move around your devices to bring them closer to this area. Alternatively, you can buy an additional system and add a new zone to cover a larger area.